Optional gear ratio 10*12 gearbox 10mm permanent magnet VSM10-816G stepper motor
Description:
VSM10-816G is 10mm permanent magnet stepper motor attached with a 10*12 mm gearbox.
We have different gear ratios for choosing (from 2:1 to 1000:1), customers can choose gear ratio based on their speed/torque requirement.
About connector type, on the picture, it’s FPC.
We can also make it PCB+4 wires+ connector, and we have different pitch of connectors, such as 1mm/1.25mm/1.5mm/2mm/2.5mm pitch and so on.
The connector most commonly used for us is 51021-0400 (1.25mm pitch connector)
Motor Parameters:
| Model No. | VSM10-816G |
| Step angle | 18°/gear ratio |
| Output shaft | D shaft/M3 lead screw shaft |
| Connector type | FPC/4 pin connector |
| Phase No. | 2 phase |
| Motor type | Bipolar |
| Coil resistance | 20Ω/40Ω |
| Rated voltage | 3.3~5V DC |
Gearbox Parameters:
| Gear ratio | 2:1 | 5:1 | 10:1 | 15:1 | 20:1 | 30:1 | 36:1 | 50:1 | 63:1 | 67:1 | 89:1 | 100:1 |
| Precise ratio | 2.002 | 4.995 | 9.677 | 14.754 | 20.501 | 29.120 | 36.122 | 51.103 | 63.071 | 66.801 | 89.227 | 99.002 |
| Tooth number | 23 | 20 | 13 | 18 | 15 | 12 | 20 | 20 | 14 | 17 | 14 | 13 |
| Gear levels | 2 | 2 | 2 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 4 |
| Efficiency | 80% | 80% | 80% | 72% | 72% | 72% | 65% | 65% | 65% | 65% | 65% | 65% |
| |
| Gear ratio | 110:1 | 150:1 | 172:1 | 210:1 | 250:1 | 275:1 | 298:1 | 380:1 | 420:1 | 500:1 | 600:1 | 1000:1 |
| Precise ratio | 110.407 | 150.948 | 171.883 | 210.591 | 250.111 | 274.403 | 297.924 | 387.689 | 421.296 | 506.155 | 599.394 | 986.406 |
| Tooth number | 12 | 18 | 13 | 12 | 13 | 12 | 12 | 12 | 12 | 18 | 16 | 12 |
| Gear levels | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 7 | 7 | 7 |
| Efficiency | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 59% | 47% | 47% | 47% |
Design drawing:
Product display:
Application of stepper motors:
Stepper motors are used for precise control, widely used on medical equipment, 3D printer, industrial precise control, automation equipment, etc.
Stepper motors can be used in any mechanisms requirement precise conrtol and rotational/linear movement.
Advantage of stepper motors:
Stepper motor can reach precise control even without close-loop encoders / without feed back system, also they do not have electrical brushed. Thus there is no electromagnetic interference and electrical sparks issues. In some cases, they can replace DC brushed motors/ brushless motors.
Stepper motors are easy to control with drivers, and this feature establish its important position in the field of precise control.
1. Precise control achievable, programmable
2. Without electromagnetic interference & electrical sparks
3. Small size
4. Reasonable price
5. Low noise
6. Long service life
Stepper motors are widely used among all industries.
Product Tags:
|
|
Optional Gear Ratio 10*12 Gearbox 10mm Permanent Magnet VSM10-816G Stepper Motor Images
|
